Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: filling gaps.
By:Etienne Muller
Date: 10/21/2009, 9:54 am
In Response To: Strip: filling gaps. (victor druten)

Hi Victor

I know this is not much use to you at the moment, But next time, (there will probably be a next time) consider seriously not using Bead and Cove, especially on the deck.

There are all sorts of advantages to using unmilled strips, one of which is what you see is what you get, provided you don't over bevel toward the inside.

Et

Messages In This Thread

Strip: filling gaps.
victor druten -- 10/19/2009, 9:07 pm
Re: Strip: filling gaps.
Scott Fitzgerrell -- 10/21/2009, 8:41 pm
Re: Strip: filling gaps.
Etienne Muller -- 10/21/2009, 9:54 am
Two options
John Caldeira -- 10/20/2009, 1:07 am
Re: Strip: filling gaps.
Bill Hamm -- 10/20/2009, 12:39 am
Re: Strip: filling gaps.
Ken Blanton -- 10/19/2009, 10:59 pm
Re: Strip: filling gaps
Jay Babina -- 10/20/2009, 8:39 am
Re: Strip: filling gaps.
Allan -- 10/19/2009, 10:09 pm