Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Heat that workshop
By:george jung
Date: 10/22/2009, 1:57 pm
In Response To: Re: Strip: Heat that workshop (Bill Hamm)

: Was gonna say the same thing, take the epoxy, cloth etc. into the home a
: couple days before you epoxy, helps alot if the resin etc. is well warmed
: ahead of time.

: Bill H.

I turned a heatlamp on the deck/deck cloth a few hours before epoxying, plus ran a space heater before that - got it up to 62 degrees! I had warmed the epoxy beforehand - worked pretty well. Shut the heat off, went home, checked this AM - looks purty good! Fill coat this evening...

Messages In This Thread

Strip: You can never be too thin..... or can you?
george jung -- 10/20/2009, 11:25 pm
Re: Strip: You can never be too thin..... or can y
Charlie -- 10/21/2009, 7:14 pm
Re: Strip: Heat that workshop *Pic*
etienne Muller -- 10/21/2009, 8:59 am
Re: Strip: Heat that workshop
Tom Yost -- 10/23/2009, 1:53 pm
Re: Strip: Heat that workshop
Mike Savage -- 10/24/2009, 8:17 am
Re: Strip: Heat that workshop
Etienne Muller -- 10/28/2009, 12:29 pm
Re: Strip: Heat that workshop *Pic*
Tom Yost -- 10/29/2009, 10:13 am
Re: Strip: Heat that workshop
Mike Savage -- 10/28/2009, 2:38 pm
Re: Strip: Heat that workshop
george jung -- 10/28/2009, 11:19 pm
Re: Strip: Heat that workshop *Pic*
Tom Yost -- 10/24/2009, 11:43 am
Re: Strip: Heat that workshop
Mike Savage -- 10/24/2009, 4:19 pm
Re: Strip: Heat that workshop *Pic*
Tom Yost -- 10/24/2009, 7:43 pm
Re: Strip: Heat that workshop
george jung -- 10/24/2009, 10:57 pm
Re: Strip: Heat that workshop
Bill Hamm -- 10/23/2009, 5:32 pm
Re: Strip: Heat that workshop
george jung -- 10/23/2009, 11:10 pm
Re: Strip: Heat that workshop
etienne Muller -- 10/21/2009, 9:04 am
Re: Strip: Heat that workshop
Bill Hamm -- 10/22/2009, 12:54 am
Re: Strip: Heat that workshop
george jung -- 10/22/2009, 1:57 pm
Re: Strip: Heat that workshop
Bill Hamm -- 10/22/2009, 4:49 pm
Re: Strip: Heat that workshop
Robert N Pruden -- 10/21/2009, 9:58 am
Re: Strip: You can never be too thin..... or can y
Bill Hamm -- 10/21/2009, 12:14 am
Re: Strip: You can never be too thin..... or can y
george jung -- 10/21/2009, 7:11 pm
Re: Strip: You can never be too thin..... or can y
Bill Hamm -- 10/22/2009, 12:53 am