: Hi All,
: I'm planning on painting a pattern on the deck of my Cirrus hybrid. the
: pattern will be flanked either side with different colour timbers so I
: don't want the pattern to look like it is floating above timber.
: Therefore, I'm expecting that I will need to paint the pattern prior to
: glass and filling.
: The process bouncing around in my head goes like this: 1. Seal coat
: 2. Paint pattern
: 3. Glass and fill
: Can anybody see any flaws with this process?
: Should paint for the pattern be acrylic or enamel?
: Cheers

Hi Craig,
I think there would adhesion problems with the paint under the glass. Unless you try two-part epoxy paint. Basically epoxy with colourant, that may allow good chemical adhesion.

Mike Savage
South West Cork