Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: filling staple holes
By:Jay Babina
Date: 11/23/2009, 10:36 am
In Response To: Strip: filling staple holes (john sullivan)

What's probably happening is that your staples holes are not really filled but the 40% you describe, probably have a surface skim coat and it just get sanded off. If you feel filling holes is good, then use a small knife and push the filler deep into the holes.

Messages In This Thread

Strip: filling staple holes
john sullivan -- 11/22/2009, 9:02 am
Re: Strip: filling staple holes
Jay Babina -- 11/23/2009, 10:36 am
Re: Strip: filling staple holes
obee -- 11/23/2009, 1:18 pm
Re: Strip: filling staple holes
john sullivan -- 11/23/2009, 5:27 pm
Re: Strip: filling staple holes
Bill Hamm -- 11/24/2009, 1:28 am
Re: Strip: filling staple holes
obee -- 11/23/2009, 1:18 pm
Re: Strip: filling staple holes
Wesley Ewell -- 11/22/2009, 12:20 pm
Re: Strip: filling staple holes
Ric -- 11/22/2009, 11:29 am