: I have some...what appear to be stress cracks in my Explorer
: coaming. Even with pressure they don't open up so I'm not
: thinking it'll break but i do want to add something to it and
: spiff it up at the same time.

: I am looking to do something like this if possible and if it will
: maybe help prevent the hairline cracks from becoming breaks. Got
: it from redfish

: If it's a bad idea, shoot it down quickly :)

Oh yeah, I'd sand it first then go over it a few times with acetone to make sure there is no wax before you try to laminate anything over it. Mask the deck well too, epoxy drips are a bitch to get off. I wouldn't worry alot about making the edges neat while you're laminating it, if you measure the width of the coaming ahead of time you can fairly easily grind the edge back after it's set up.

Bill H.

Bill H.