: Hello Bob,

: Actually this was for the gunwales on a skin-on-frame kayak, but I
: do plan to use the stuff for my next wood surfboard project
: because I was very pleased with the workability of it. I have
: built a cedar strip kayak so I can give you some feedback on the
: two woods. It is pretty much the same weight and very similar
: characteristics of cedar. It does have a bit more tendency to
: want to tear along the grain. It also typically doesn't have as
: even color as cedar. It can go from yellow to pink to brown in
: one board. It seems to wick moisture so store it carefully. It
: works very easily just like cedar. Again you have to watch
: tear-out and splintering, but with sharp tools it should be a
: pleasure to work with.

: I'm also currently building a wood surfboard out of balsa and
: mahogany and I think for the next one (a 12' paddleboard) I may
: use some cypress. It's one of the few lightweight woods I can
: get locally.

Cypress should be somewhat more resistant to gaining moisture than cedar as it's an oily wood. Btw, WRC is in the same family of woods.

Bill H.