: I agree with the earlier responses regarding any lightweight filler
: for endpours, and that endpours add weight.

: My preference is to make TINY endpours in the hull where I will
: drill a hole for a handle loop, and drill the hole in the exact
: position before joining hull and deck. When joined, make a
: second TINY endpour with the kayak on end,to seal it nicely.

: John

Yep, that's tiny :)

Actually mine could have been made a little bit bigger. When I first drilled for the bow and stern toggles the holes leaked. Had to epoxy in a watertight tube to get them waterproof.

Still, with an internal stem, there's little reason to fill the boat with epoxy, just adds weight.

Bill H.