: You can use epoxy like contact cement to glue up� larger veneer
: pieces. You have to experiment with your epoxy as far as heat
: and time or do it on the weekend when you're around.
: You coat each surface good. Then there will be a period when the
: epoxy has kicked and becomes very tacky. You can then put the
: pieces together and roll them down. Make sure your veneer
: sandwich will make the bend around the front of the cockpit. The
: glass sandwich I used is quite flexible but stiffens up more
: each day. Once I add a another tape layer on the outside and
: inside and it was well hardened, it was very strong and stiff.
: Labor-wise it's fairly simple.
Pretty slick - don't believe I've heard of anyone doing this before. Any pics, btw?
Messages In This Thread
- Material: coaming construction methods compared
DaveS -- 1/3/2010, 9:44 am- Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 8:48 am- Re: Material: coaming construction methods compare
wwfloyd -- 1/5/2010, 1:10 pm- Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 4:39 pm
- Re: Material: coaming construction methods compare
Don -- 1/5/2010, 10:46 am- Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 12:53 pm- Re: Material: coaming construction methods compare
george jung -- 1/5/2010, 4:34 pm
- Re: Material: coaming construction methods compare
- Re: Material: coaming construction methods compare
- Re: Material: coaming construction methods compare
Don -- 1/4/2010, 6:53 pm- Re: Material: coaming construction methods compare *PIC*
Scott Fitzgerrell -- 1/4/2010, 4:23 pm- Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:09 pm- Re: Material: coaming construction methods compare
Etienne Muller - Ireland -- 1/4/2010, 3:49 pm- Thanks *NM*
mtkayak -- 1/4/2010, 4:22 pm
- Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:11 pm- Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:10 pm - Thanks *NM*
- Re: Material: coaming construction methods compare
Bob Brownie -- 1/4/2010, 11:15 am- Re: Material: coaming construction methods compare *PIC*
Etienne Muller - Ireland -- 1/3/2010, 12:27 pm- Re: Material: coaming construction methods compare
Bill Hamm -- 1/4/2010, 12:22 am- Re: Material: coaming construction methods compare *PIC*
Etienne Muller - Ireland -- 1/3/2010, 12:28 pm - Re: Material: coaming construction methods compare *PIC*
- Re: Material: coaming construction methods compare
kirk Briggs -- 1/3/2010, 11:37 am- Re: Material: coaming construction methods compare
Andy Boyd -- 1/3/2010, 8:50 pm- Re: Material: coaming construction methods compare *PIC*
tony olsen -- 1/4/2010, 8:21 am- Re: Material: coaming construction methods compare
Bill Hamm -- 1/5/2010, 1:00 am
- Re: Material: coaming construction methods compare
Ric -- 1/3/2010, 11:04 pm - Re: Material: coaming construction methods compare
- Re: Material: coaming construction methods compare
george jung -- 1/3/2010, 3:29 pm- Re: Material: coaming construction methods compare
Bill Hamm -- 1/4/2010, 12:18 am- Re: Material: coaming construction methods compare
DaveS -- 1/3/2010, 11:59 pm - Re: Material: coaming construction methods compare
- Re: Material: coaming construction methods compare *PIC*
- Re: Material: coaming construction methods compare
- Re: Material: coaming construction methods compare