: Question. Fiberglassing Guillemot Double... Book says before
: fiberglassing, remove deck from strongback and forms, turn hull
: over and fiberglass exterior and interior of hull. Has anyone
: fiberglassed the outside of deck first while still on strongback
: and forms before removing deck to do the hull? If I did it this
: way the deck might be less likely to distort as I set it aside
: to do the hull.... I would also tape a few inches below the hull
: shear line before fiberglassing deck so they would still
: separate.....

That's the way I'd do it, glass it on the forms. The glued hull/deck are fairly weak before they are glassed.

Bill H.