: I'm glassing the inside of the
: deck. THEN...I'm putting deck on hull...overlapping 2-3 "(
: does it make a difference how much overlap?).

Hi Vic. If by overlap you mean the tape overlap at the deck hull join, then an inch or perhaps a little more is enough.

: QUESTION. I've been using Triton III for almost everything. Can I
: run a small film or strip of glue between the hull and deck when
: I put them together with packing tape?

Why not use a bead of thickened epoxy to do this?

: 3" seam down the inside seam. Someone recommended going
: over this with another 1 to 2" strip of fiber. Necessary?

My opinion, a fillet where necessary and 2 inch tape is plenty. First timers tend to overbuild.

Et