I am building a Sea Bee 13 from the Yostwerks site. I have cut out all of the station molds, and have a question about station no. 3. Has anyone built this model, and if so, can you tell me if section 13 is suppose to come to a peak or have a flat area on the top. The flat area makes sense as a place to secure the coming, but the deck ridge doesn't appear to fit correctly from section 1 and 2. If I'm looking at it correctly there would be a bend in the deck ridge the way I have the sections cut out. The offset table has HB at 0.20 feet and HAB at .915 feet. To me this means that the top would be approximately 0.40 feet flat, but I am be misinterpretting it.

Any insight you can provide will be greatly appreciated.

Thanks