Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Inside hull sanding/ scraping
By:Ric
Date: 2/12/2010, 6:22 pm
In Response To: Re: Strip: Inside hull sanding/ scraping (Joe Whitman)

I use a little plane, a friend ground a round bottom onto it and the blade. http://www.leevalley.com/wood/page.aspx?c=&p=32700&cat=1,41182
You can also buy ready-made round bottom planes but they're pretty expensive.

Ric

Messages In This Thread

Strip: Inside hull sanding/ scraping
Joe Whitman -- 2/11/2010, 1:08 pm
Re: Strip: Inside hull sanding/ scraping
Peter Sebbage -- 2/11/2010, 8:08 pm
Re: Strip: Inside hull sanding/ scraping
Joe Whitman -- 2/12/2010, 4:09 pm
Re: Strip: Inside hull sanding/ scraping
Ric -- 2/12/2010, 6:22 pm
Re: Strip: Inside hull sanding/ scraping
Bill Hamm -- 2/11/2010, 2:44 pm
Re: Strip: Inside hull sanding/ scraping
Fred -- 2/11/2010, 2:20 pm
Re: Strip: Inside hull sanding/ scraping
george jung -- 2/11/2010, 1:55 pm
Re: Strip: Inside hull sanding/ scraping
Joe Whitman -- 2/11/2010, 2:09 pm
Re: Strip: Inside hull sanding/ scraping
Jay Babina -- 2/11/2010, 4:14 pm