Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: cloudy epoxy
By:Rod Tait
Date: 2/15/2010, 7:54 pm
In Response To: Epoxy: cloudy epoxy (Clay)

Clay,
All is not lost.
I would suggest that you remove the glass by investing in a heat stripping gun and slowly peeling off the glass and then re-sand your boat and re-fiberglass. I have some info on my web site on how to do it. www.orcaboats.ca on the how to page

Messages In This Thread

Epoxy: cloudy epoxy
Clay -- 2/15/2010, 5:12 pm
Re: Epoxy: cloudy epoxy
Jay Babina -- 2/16/2010, 7:51 am
Re: Epoxy: cloudy epoxy
Rod Tait -- 2/15/2010, 7:54 pm
Re: Epoxy: cloudy epoxy
Mike Bielski -- 2/15/2010, 6:13 pm