: Thanks. That's a modified Werner ladder rack. I custom made the
: towers, with sockets attached by square U-bolts, which allow
: adjustment. As manufactured, the inner arms are length
: adjustable, so I can get 2 boats up there, though the inside one
: is more difficult to put in place.

: Padding on the towers is heavy pipe unsulation. The rest of the
: padding is dock bumper.

: I cut about 5 inches off the upright lengths. As supplied, the bed
: mounts were too light for my taste. So, I made slip-tubes with
: beefy custom mounts. The system was rated for 200 lbs. by
: Werner, even with the light bed hardware.
Thanks for the information. I'm going to do something similar. I like the fact that the rack is easy to remove.