Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Using tung oil
By:Ben Blackburn
Date: 3/5/2010, 4:50 am
In Response To: Re: Material: Using tung oil (George)

: I'm thinking of keeping the skin of my first SOF translucent,
: and would want the oil to bleed into the cloth.

You need the waterproofing varnish or polyurethane to seal the cloth not the oil. Eventually it will not be waterproof.
I tried to wash out the oil from the cloth using pure washing up liquid then sealed the whole with Skin Boats 2 part polyurethane. The boat leaks a bit but am not sure that these areas where the oil bled are the cause. You've got me thinking. :¬(

Messages In This Thread

Material: Using tung oil
George -- 3/2/2010, 9:23 am
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 8:23 am
Re: Material: Using tung oil
George -- 3/5/2010, 1:15 pm
Re: Material: Using tung oil
Mike Savage -- 3/6/2010, 5:49 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:45 am
Re: Material: Using tung oil
Mike Savage -- 3/7/2010, 5:38 am
Re: Material: Using tung oil
Bill Hamm -- 3/8/2010, 12:27 am
Re: Material: Using tung oil
Mike Savage -- 3/8/2010, 6:10 am
Re: Material: Using tung oil
Bill Hamm -- 3/9/2010, 12:47 am
Re: Material: Using tung oil
george -- 3/8/2010, 5:24 am
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 6:58 pm
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:43 am
Re: Material: Using tung oil
Brian Nystrom -- 3/6/2010, 9:40 am
Re: Material: Using tung oil
Brian Nystrom -- 3/3/2010, 8:36 am
Re: Material: Using tung oil
George -- 3/4/2010, 4:19 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:31 am
Re: Material: Using tung oil
Brian Nystrom -- 3/4/2010, 7:44 am
Re: Material: Using tung oil
George -- 3/5/2010, 4:36 am
Re: Material: Using tung oil
Brian Nystrom -- 3/5/2010, 7:10 am
Re: Material: Using tung oil
George -- 3/5/2010, 1:06 pm
Re: Material: Using tung oil
George -- 3/8/2010, 12:49 pm
Re: Material: Using tung oil
Mike Savage -- 3/5/2010, 6:29 am
Re: Material: Using tung oil
Brian Nystrom -- 3/5/2010, 7:01 am
Re: Material: Using tung oil
Mike Savage -- 3/5/2010, 2:41 pm
Re: Material: Using tung oil
Mike Bielski -- 3/5/2010, 8:14 am
Re: Material: Using tung oil
Bill Hamm -- 3/7/2010, 12:36 am
Re: Material: Using tung oil
Ben Blackburn -- 3/5/2010, 4:50 am
Re: Material: Using tung oil *PIC*
Ben Blackburn -- 3/4/2010, 11:03 am
Re: Material: Using tung oil
Brian Nystrom -- 3/4/2010, 7:52 pm