: i am ready to start building a night heron and would like some
: advice to get started. my strongback is cut to 13' 11 " as
: indicated in the plan. which form is fastened first and how far
: from which end. should they be 12" on center? any tips is
: appreciated thank you bill
Hi bill
assuming you are using 1/2" timber for the forms,
I imagine the centre forms would be 11" apart. It's the paper forms you want to be always 12" apart. So if you stick them to 1/2" timber, and the form should be placed on the strongback so that the paper form faces the thinner end of the boat at that point. So the middle two forms end up 11" apart. Personally I found it easiest to put the forms on from the middle out, because this made them easier to line up
cheers Ian
Messages In This Thread
- Strip: getting started spacing forms
bill steadman -- 3/15/2010, 7:22 pm- Re: Strip: getting started spacing forms
Ian johnson -- 3/17/2010, 2:26 am- Re: Strip: getting started spacing forms
jollym0n -- 3/15/2010, 10:51 pm - Re: Strip: getting started spacing forms
- Re: Strip: getting started spacing forms