Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

I know I am late butt...
By:Robert N Pruden
Date: 3/19/2010, 8:36 pm
In Response To: Re: S&G: Glued to Bench (Charles Robinson)

I would have tried heating the underside of the work bench to soften the epoxy from underneath. The panel might have lifted off without too much prying and the only bit of unsightliness would have stayed on the underside of the bench. A good heat gun could have made this happen easily.

Robert N Pruden

Messages In This Thread

S&G: Glued to Bench
Charles Robinson -- 3/19/2010, 8:31 am
Re: S&G: Glued to Bench
Malcolm Schweizer -- 3/19/2010, 2:36 pm
Re: S&G: Glued to Bench
Charles Robinson -- 3/19/2010, 5:23 pm
I know I am late butt...
Robert N Pruden -- 3/19/2010, 8:36 pm
Re: S&G: Glued to Bench
Kudzu -- 3/19/2010, 2:07 pm
Re: S&G: Glued to Bench
Jay Babina -- 3/19/2010, 10:55 am