I gave up on tape a long time ago as I never got satisfactory wetout results with it. Now bias cut (45 degree across the roll) cloth is the only thing I will use.

: I used 8 oz tape because it was all I could get at the
: time--obviously not a good decision. I've never removed glass
: using heat but nice to know it's possible and I may go that
: route. Any tips for doing that with a heat gun? I'm guessing I'd
: have to grab it with pliers or some such and pull as its heated.

: I believe I did let the shop cool down too much before that final
: application. I'm using MAS resin with slow hardener and probably
: didn't have it warm enough.

: Thanks,
: Ian