: I am getting quite close to finishing building my wife's Arctic
: Tern 14. I do notice, however that I have some varying
: thicknesses of epoxy over the hull. It seems that I applied the
: epoxy more thinly on the more vertical sections of the hull and
: there are a few places where you can still make out the pattern
: of the weave underneath. Should I put another layer of epoxy on
: these sections or should I just sand it down less than the rest?
: This is my first boat build so I have no real idea what it
: should look like.

: Thanks

: Rod

I'd put more on the thin sections, as mentioned you need to sand it all smooth prior to varnish and you really don't want to sand into the glass.

Bill H.