: I built a Point Bennet by Duane Strosaker. Haven't finished the
: shock straps or the bulkheads and hatches but took it out for a
: trial run today. Killed my hips. I put the hip braces in towards
: the center too much. I need to move them out a little bit (maybe
: more) towards the chines, and I'm not too sure how to do it. I
: epoxied and fiberglassed them from the coaming to the floor and
: I wonder if heating the epoxy might loosen the fiberglass on the
: floor of the cockpit. Open to suggestions.

: Charles Robinson

I'd just cut the blocks out, sand the glass smooth with the hull/coaming and try again.

Bill H.