A heat gun should really help with the pulling off with pliers part.

Brian

: If it won't take any more resin and just stays white, then yeah,
: looks like you get to sand it off. Might try pulling it off with
: pliers (catfish skinning pliers?), try scrapers, try a wire
: wheel in a drill, try anything and everything that sounds like
: it might work. Use caution when experimenting, of course; the
: idea is to save retro time, not add hours to the project.

: I once got about halfway through glassing out a deck and had an
: emergency call me away, couldn't get back to it for 24 hours.
: The "wet edge" I left was well defined, and the next
: day I simply took up where I left off, and it worked out well
: except you could see where the break in the action had occurred.
: But lo and behold, the demarcation faded, then vanished
: altogether in a couple days. That was on my Cormorant, in '04,
: and I'm still paddling that sweetheart.

: Good luck with yours, and let us know what happens....?