: did not know of Lexel. Stocked 3M 4000 UV fast cure. Works on nylon
: fittings and the plastic foam pad Helen at NRS sent along but
: first try on a Pelican box housing batteries/air switch
: relay/PMD620 peeled off. Advice on gluing Pelican plastic ?
: the fittings are:

: http://www.usplastic.com/catalog/search
: 64121 Nylon Adapter Hose Barb With Lock Nut 3/8" Barb
: 61072 Polypropylene Union Tube And Hose Fitting 1/2"

: batteries from Batteryspace powering an Attwood 625 with 14.8
: volts/5200mAh

: Memorial Day weekend at Senator Wash reservoir was excellent trying
: out the Backup bought from USK-Horodowich. Now can efficently
: practice bracing upside down, the pump going one better. 2-3
: days later as I went north to the Columbia where it's late fall,
: Yuma went to 110.

Had to go look at Pelican's site. They say the boxes are rotomolded, so suspect they are poly like the kayaks. If so they are difficult at best to glue. Might try West Epoxy's site and look at their G-flex epoxy. They've had some sucess using it on poly.

Bill H.