: Whatever works for you, there are no hard and fast rules here. I
: find the roller tends to lift the glass as it passes and tends
: to create air pockets under the glass, but that's just me. I use
: a brush and then squeegie the excess off.

: I use a roller though to apply finish coats and use it for varnish
: too.

: Bill H.

I agree the roller will lift the glass if you go too fast. What I do is tiny back and forth strokes pushing down a bit and rolling up then back then up a little more then back and on an on.

Like you said- whatever works. Lots of folks squeegee only and all the videos I'm seeing are squeegeeing so I was starting to think maybe I'm missing something! Now for building foam boards if adding color as I go then I squeegee. You can mix color right on the board and get a "tie dye" effect. Maybe you should try that on the next skin on frame. Just pour out different colors and squeegee them out letting the colors mix here and there. You can swirl them or spread them straight back and fade from color to color. Might look cool on a kayak- or honestly it could turn out quite horrible!!!