Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Squeegee
By:Jay Babina
Date: 7/6/2010, 7:09 am
In Response To: Re: Squeegee (Mike Bielski)

Many times builders work in the winter in garages, basements and turn up the heat prior to working there and start their glassing. The place heats up. and the wood compresses and squeezes out air. You can actually see the bubble pattern between strips. If you heat your work space a good hour before glassing and then back down the heat as you start, you will not get any air bubbles. Pre-coating is not a bad thing to do as recommended advice for a beginner.

Messages In This Thread

Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/4/2010, 8:01 am
Re: Epoxy: Roll or Squeegee?
Mike Hanks -- 7/8/2010, 2:52 am
Re: Epoxy: Roll or Squeegee?
Robert N Pruden -- 7/6/2010, 10:39 pm
Re: Epoxy: Roll or Squeegee?
Don Goss -- 7/5/2010, 8:47 am
Re: Epoxy: Roll or Squeegee?
Kurt Maurer -- 7/5/2010, 10:29 am
Re: Epoxy: Roll or Squeegee?
george jung -- 7/5/2010, 11:22 pm
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 11:44 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/5/2010, 12:15 am
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 3:58 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/6/2010, 7:28 am
Squeegee
Jay Babina -- 7/4/2010, 6:37 pm
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 4:12 am
Re: Squeegee
Jay Babina -- 7/5/2010, 9:24 am
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 11:53 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 10:38 am
Re: Squeegee
Jay Babina -- 7/6/2010, 7:09 am
Re: Squeegee
Bill Hamm -- 7/6/2010, 2:37 pm
Re: Squeegee
Dan Caouette (CSFW) -- 7/6/2010, 5:29 pm
Re: Squeegee
Bill Hamm -- 7/7/2010, 7:06 am
Re: Squeegee
Fred -- 7/6/2010, 8:34 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 1:22 am
Re: Squeegee
Paul G. Jacobson -- 7/11/2010, 12:26 am
Re: Squeegee
Bill Hamm -- 7/11/2010, 12:35 am
Re: Squeegee
Nick Schade - Guillemot Kayaks -- 7/5/2010, 8:39 am
Re: Epoxy: Roll or Squeegee?
Etienne Muller -- 7/4/2010, 2:01 pm
Re: Epoxy: Roll or Squeegee?
Wesley Ewell -- 7/4/2010, 9:36 am
Re: Epoxy: Roll or Squeegee?
wwfloyd -- 7/4/2010, 8:34 am
Re: Epoxy: Roll or Squeegee?
Rob Macks / Laughing Loon CC&K -- 7/4/2010, 8:13 am