Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Squeegee
By:Fred
Date: 7/6/2010, 8:34 am
In Response To: Re: Squeegee (Jay Babina)

I precoat partly because Pygmy suggests it and mostly because I can fix my errors better. I fix after the precoat and color match is then easier.

: Many times builders work in the winter in garages, basements and
: turn up the heat prior to working there and start their
: glassing. The place heats up. and the wood compresses and
: squeezes out air. You can actually see the bubble pattern
: between strips. If you heat your work space a good hour before
: glassing and then back down the heat as you start, you will not
: get any air bubbles. Pre-coating is not a bad thing to do as
: recommended advice for a beginner.

Messages In This Thread

Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/4/2010, 8:01 am
Re: Epoxy: Roll or Squeegee?
Mike Hanks -- 7/8/2010, 2:52 am
Re: Epoxy: Roll or Squeegee?
Robert N Pruden -- 7/6/2010, 10:39 pm
Re: Epoxy: Roll or Squeegee?
Don Goss -- 7/5/2010, 8:47 am
Re: Epoxy: Roll or Squeegee?
Kurt Maurer -- 7/5/2010, 10:29 am
Re: Epoxy: Roll or Squeegee?
george jung -- 7/5/2010, 11:22 pm
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 11:44 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/5/2010, 12:15 am
Re: Epoxy: Roll or Squeegee?
Malcolm Schweizer -- 7/5/2010, 3:58 am
Re: Epoxy: Roll or Squeegee?
Bill Hamm -- 7/6/2010, 7:28 am
Squeegee
Jay Babina -- 7/4/2010, 6:37 pm
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 4:12 am
Re: Squeegee
Jay Babina -- 7/5/2010, 9:24 am
Re: Squeegee
Malcolm Schweizer -- 7/5/2010, 11:53 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 10:38 am
Re: Squeegee
Jay Babina -- 7/6/2010, 7:09 am
Re: Squeegee
Bill Hamm -- 7/6/2010, 2:37 pm
Re: Squeegee
Dan Caouette (CSFW) -- 7/6/2010, 5:29 pm
Re: Squeegee
Bill Hamm -- 7/7/2010, 7:06 am
Re: Squeegee
Fred -- 7/6/2010, 8:34 am
Re: Squeegee
Mike Bielski -- 7/5/2010, 1:22 am
Re: Squeegee
Paul G. Jacobson -- 7/11/2010, 12:26 am
Re: Squeegee
Bill Hamm -- 7/11/2010, 12:35 am
Re: Squeegee
Nick Schade - Guillemot Kayaks -- 7/5/2010, 8:39 am
Re: Epoxy: Roll or Squeegee?
Etienne Muller -- 7/4/2010, 2:01 pm
Re: Epoxy: Roll or Squeegee?
Wesley Ewell -- 7/4/2010, 9:36 am
Re: Epoxy: Roll or Squeegee?
wwfloyd -- 7/4/2010, 8:34 am
Re: Epoxy: Roll or Squeegee?
Rob Macks / Laughing Loon CC&K -- 7/4/2010, 8:13 am