Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: 2 bad batches, incorrect ratios
By:Bill Hamm
Date: 7/7/2010, 11:23 am
In Response To: Epoxy: 2 bad batches, incorrect ratios (Doug S)

: I've heard people on here make the statement - pick a brand of
: epoxy and stick with it. I wondered why & what was wrong
: with switching. I used up my original purchase of West Systems
: epoxy a little while back and decided to go with Raka for $$$
: purposes.

: I got caught by the pumps. The West Systems pumps were metered to
: the correct ratio. The Raka pumps weren't - so, I was supposed
: to handle the 2:1 ratio myself. I realized this morning the
: reason my last batch of epoxy (and assumingly the one on top of
: that - though, I haven't been down to check it out) hadn't
: hardened. I did 1:1 on the resin-to-hardener.

: SO... what now? My assumption is that I sand off the gooey stuff
: and reapply new. Right?

: This is on a Yost SOF.

: -Doug

I doubt you can sand it, I'd scrape it off. Not sure where you're using it on a Yost?

I use it alot on Tom's boats but my methods are somewhat different.

Bill H.

Messages In This Thread

Epoxy: 2 bad batches, incorrect ratios
Doug S -- 7/7/2010, 10:33 am
Re: Epoxy: 2 bad batches, incorrect ratios
Larry C. -- 7/18/2010, 6:59 pm
Gloves for acetone? Latex, nitrile, vinyl????
Doug S -- 7/8/2010, 9:00 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
ken -- 9/2/2010, 1:30 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
Robert N Pruden -- 7/13/2010, 2:02 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Bill Hamm -- 7/13/2010, 8:42 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Al Edie -- 9/1/2010, 6:47 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
Bill Hamm -- 9/2/2010, 2:02 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Mike Bielski -- 9/2/2010, 12:59 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Donovan -- 9/1/2010, 9:12 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
Will N To Go -- 9/1/2010, 8:24 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
Bill Hamm -- 7/9/2010, 1:30 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Mike Savage -- 7/9/2010, 4:48 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Bill Hamm -- 7/9/2010, 1:32 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
Bill Hamm -- 7/9/2010, 1:34 am
Re: Gloves for acetone? Latex, nitrile, vinyl????
JohnK -- 7/8/2010, 9:05 pm
Re: Gloves for acetone? Latex, nitrile, vinyl????
Mike Hanks -- 7/8/2010, 11:54 pm
How about them archives - answers
Doug S -- 7/7/2010, 11:37 am
Re: How about them archives - answers
Scott B -- 7/17/2010, 10:55 pm
Re: How about them archives - answers
Will N to Go -- 7/15/2010, 12:15 am
Re: How about them archives - answers
Dan Caouette (CSFW) -- 7/15/2010, 10:16 am
Re: How about them archives - answers
Bill Hamm -- 7/16/2010, 1:33 am
Re: How about them archives - answers
wwfloyd -- 7/15/2010, 4:56 am
Re: How about them archives - answers
Jay Babina -- 7/8/2010, 8:13 am
Re: Epoxy: 2 bad batches, incorrect ratios
Bill Hamm -- 7/7/2010, 11:28 am
Re: Epoxy: 2 bad batches, incorrect ratios
kirk -- 7/7/2010, 6:22 pm
Re: Epoxy: 2 bad batches, incorrect ratios
Doug S -- 7/8/2010, 7:57 am
Re: Epoxy: 2 bad batches, incorrect ratios
Clayton Plunkett -- 7/8/2010, 6:01 pm
Re: Epoxy: 2 bad batches, incorrect ratios
Doug S -- 7/8/2010, 8:51 pm
Re: Epoxy: 2 bad batches, incorrect ratios
Bill Hamm -- 7/9/2010, 1:27 am
Re: Epoxy: 2 bad batches, incorrect ratios
Bill Hamm -- 7/7/2010, 11:23 am
Re: Epoxy: 2 bad batches, incorrect ratios
Doug S -- 7/7/2010, 11:39 am
Re: Epoxy: 2 bad batches, incorrect ratios
Bill Hamm -- 7/7/2010, 12:45 pm
Re: Epoxy: 2 bad batches, incorrect ratios
Doug S -- 7/7/2010, 2:08 pm
Re: Epoxy: 2 bad batches, incorrect ratios
Bill Hamm -- 7/8/2010, 2:31 am