Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: varnish problem
By:Bill Hamm
Date: 9/14/2010, 11:08 am
In Response To: Strip: varnish problem (victor druten)

: Night Heron done. Varnished it and let it set for 5 days. Hung on
: braces ( metal with rubber coating) on ceiling. Got it down
: after one week. Where the kayak hit the braces are two very
: visible smudge-like lines. Tried soft cotton...Tried
: Pledge...rubbed lightly...then harder. NOPE...nothing. Any
: suggestions ( besides more varnish)...on how to get rid of these
: foggy smudges. They are about 1" wide...1 foot long. Looks
: like the HIGH gloss just got rubbed off. Deck is all this exotic
: wood in neat design....so much work...arghhhhhhhhhhhhhhhhhhh!
: HELP!

Pretty much have to sand those areas down and revarnish. It's why I varnish the deck and hull separately and let it sit in the air to dry, can take a week or more for all the solvents to come out of the varnish.

Bill H.

Messages In This Thread

Strip: varnish problem
victor druten -- 9/14/2010, 9:54 am
Re: Strip: varnish problem
Rod Tait -- 9/15/2010, 11:10 am
Re: Strip: varnish problem
victor druten -- 9/15/2010, 1:58 pm
Re: Strip: varnish problem
Ian Johnson -- 9/15/2010, 6:35 pm
Re: Strip: varnish problem
victor druten -- 9/15/2010, 9:31 pm
Re: Strip: varnish problem
Bill Hamm -- 9/16/2010, 2:41 am
Re: Strip: varnish problem
Scott Baxter -- 9/15/2010, 10:14 pm
Re: Strip: varnish problem
Eric -- 9/15/2010, 6:33 pm
Re: Strip: varnish problem
victor druten -- 9/15/2010, 9:29 pm
Re: Strip: varnish problem
Malcolm Schweizer -- 9/14/2010, 6:11 pm
Re: Strip: varnish problem
Bill Hamm -- 9/14/2010, 11:08 am
Re: Strip: varnish problem
Eric -- 9/14/2010, 11:42 am
Re: Strip: varnish problem
Bill Hamm -- 9/14/2010, 12:49 pm