Final tests

I was curious about Gorilla glue and Titebond III so I did a test with both under the same conditions and testing procedure. So the top three strongest are now as follows:
1. Pygmyboats method with tape on both sides only still the strongest - the wood broke outside the taped area, in other words the joint was stronger than the wood.
2. Gorilla glue and a 1/16" splined butt joint - break at the joint on the outside of the curve - about 3/4 as strong as the taped joint.
3. A tie - epoxied 1/16" spline and Titebond with a 1/16" spline - breaks both at the joint on the outside of the curve - about half as strong as the taped joint.

I promise not to do any more testing but thought others may have wondered. Hope this helps someone.