Date: 9/23/2010, 11:22 am
: Hello again,
: In my effort to get My merganser just right im entertaining cutting
: out the half oval knee braces that were part of the coaming
: wood.
: the keyhole shape although very secure is also a PIA getting in and
: esp out of boat. seems like the cockpit would be secure enough
: with out them (most SOF boats I see dont have any) Im looking at
: doing an SOF this winter and wasnt planning on intsalling knee
: braces.
: another issue is that when my legs need some stretching the key
: hole doesnt give me any wiggle room to lift knee up and stretch
: things out and get the circulation going .
: if I decided to have similar bracing in the future I can always
: epoxy in another set or fabricate foam ones? im thinking if I
: remove them ,life on the water would be more comfortable.
: your thoughts please.
: "John"
If your knees fit snugly under the deck without them, you might cut them off. The Merganser responds beautifully to carved turns, though, which require lifting with your knees. I left them off mine, but am considering adding them back. You might also simply make them smaller. -Wes
Messages In This Thread
- S&G: Knee baces (cut them out??)
John lasky -- 9/23/2010, 9:24 am- Re: S&G: Knee baces (cut them out??)
Bill Hamm -- 9/24/2010, 1:54 am- Re: S&G: Knee baces (cut them out??)
John lasky -- 9/24/2010, 8:46 am- Re: S&G: Knee baces (cut them out??)
Bill Hamm -- 9/25/2010, 1:47 am- Re: S&G: Knee baces (cut them out??)
John lasky -- 9/27/2010, 2:42 pm- Re: S&G: Knee baces (cut them out??)
Bill Hamm -- 9/27/2010, 8:27 pm
- Re: S&G: Knee baces (cut them out??)
- Re: S&G: Knee baces (cut them out??)
- Re: S&G: Knee baces (cut them out??)
- Re: S&G: Knee baces (cut them out??)
Wesley Ewell -- 9/23/2010, 11:22 am - Re: S&G: Knee baces (cut them out??)
- Re: S&G: Knee baces (cut them out??)