Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Thickness Planer
By:Jay Babina
Date: 11/15/2010, 4:50 pm
In Response To: Strip: Thickness Planer (Nick Riccardi)

Unless you're preparing a list for Santa, do you really need one for strip building? I own a 12" Ryobi and have never run a strip through it. I use it to level wood for other uses but mine sits idle for more than a year at a time. You can set up a table saw to cut paper thin strips with a little patience. I do think Rob is right about using strips all equal thickness but every boat I built has some left over strips and the thickness did vary. It took me nothing to level it out with a plane.

Messages In This Thread

Strip: Thickness Planer
Nick Riccardi -- 11/14/2010, 7:18 pm
Re: Strip: Thickness Planer
Jay Babina -- 11/15/2010, 4:50 pm
Re: Strip: Thickness Planer
Mike Savage -- 11/16/2010, 7:06 am
Re: Strip: Thickness Planer
Glen Smith -- 11/15/2010, 8:38 pm
Re: Strip: Thickness Planer
Farback -- 11/15/2010, 9:00 pm
Re: Strip: Thickness Planer
Kurt Maurer -- 11/15/2010, 8:08 pm
Re: Strip: Thickness Planer
John Michne -- 11/15/2010, 7:55 am
Re: Strip: Thickness Planer
J Law -- 11/15/2010, 8:10 am
Re: Strip: Thickness Planer
Malcolm Schweizer -- 11/15/2010, 6:44 am
Re: Strip: Thickness Planer
Randy Echtinaw -- 11/15/2010, 10:07 am
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 12:28 pm
Re: Strip: Thickness Planer
Dan Caouette (CSFW) -- 11/15/2010, 12:54 pm
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 2:58 pm
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 2:52 pm
Re: Strip: Thickness Planer
Mike Bielski -- 11/15/2010, 1:06 pm
Re: Strip: Thickness Planer
Dan Caouette (CSFW) -- 11/15/2010, 1:33 pm
Re: Strip: Thickness Planer
Mike Bielski -- 11/15/2010, 3:19 pm
Re: Strip: Thickness Planer
Nick Riccardi -- 11/15/2010, 8:36 am
Re: Strip: Thickness Planer
fred g -- 11/14/2010, 10:12 pm
Re: Strip: Thickness Planer
Randy Echtinaw -- 11/15/2010, 6:34 am
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 9:49 am
Re: Strip: Thickness Planer
J Law -- 11/15/2010, 8:01 am
Re: Strip: Thickness Planer
fred g -- 11/15/2010, 8:45 am
Re: Strip: Thickness Planer
Mike Bielski -- 11/14/2010, 7:47 pm
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 12:50 am
Re: Strip: Thickness Planer
J Law -- 11/15/2010, 12:44 am
Re: Strip: Thickness Planer *PIC*
Kurt Maurer -- 11/14/2010, 7:43 pm
Re: Strip: Thickness Planer
Bill Hamm -- 11/15/2010, 12:47 am