Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Webbing loops - cutting the slots
By:wwfloyd
Date: 11/18/2010, 9:06 am
In Response To: Re: Strip: Webbing loops - cutting the slots *PIC* (Dan Caouette (CSFW))

Ah, thanks. I had seen the underside some time ago, but had forgotten about the tubes. I figured there had to be a reason.

: Thanks! I wish I could have but with tube fittings you can't put
: the knots on the inside. Those aren't just holes drilled through
: the deck and sealed. The lines runs through a tube of solid
: fiberglass. You'd need a really big tube to hide the knot. Check
: out the blog entry.

:
: http://clearstreamwood.com/WordPress/projects/200709gmm_nereida/nereida-njord-fiberglass-tube-deck-fittings

: I also just put some on the Neytiri NH in the picture below. On
: this project we're only using them for the perimeter line. The
: deck lines will have recessed CF fittings with stainless steel
: pins. I just installed those this morning.

Messages In This Thread

Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/15/2010, 9:05 pm
Re: Strip: Webbing loops - cutting the slots
Paul Rummler -- 11/16/2010, 12:02 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:16 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:17 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Bob Beaullieu -- 11/16/2010, 5:19 am
Re: Strip: Webbing loops - cutting the slots
george jung -- 11/17/2010, 5:46 pm
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/17/2010, 6:20 pm
Re: Strip: Webbing loops - cutting the slots
wwfloyd -- 11/18/2010, 8:32 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/18/2010, 8:56 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/19/2010, 1:01 am
Re: Strip: Webbing loops - cutting the slots *PIC*
Dan Caouette (CSFW) -- 11/19/2010, 8:19 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/19/2010, 2:59 pm
Re: Strip: Webbing loops - cutting the slots
Ric -- 11/18/2010, 7:27 pm
Re: Strip: Webbing loops - cutting the slots
wwfloyd -- 11/18/2010, 9:06 am
Deckline...
Dan Caouette (CSFW) -- 11/18/2010, 9:36 am
Re: Deckline...
Simeon -- 11/18/2010, 8:59 pm
Re: Deckline...
Bill Hamm -- 11/19/2010, 12:57 am
Re: Deckline...
Dan Caouette (CSFW) -- 11/19/2010, 8:21 am
Re: Deckline...
Chris Richer -- 11/19/2010, 12:23 pm
Re: Deckline...
Mike Savage -- 11/18/2010, 1:51 pm
Re: Deckline...
wwfloyd -- 11/18/2010, 10:07 am
Re: Strip: Webbing loops - cutting the slots
Farback -- 11/17/2010, 7:52 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:33 am
Re: Strip: Webbing loops - cutting the slots
Dan Caouette (CSFW) -- 11/18/2010, 8:57 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:37 pm
Re: Strip: Webbing loops - cutting the slots *PIC*
Kurt Maurer -- 11/15/2010, 10:17 pm
Re: Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/17/2010, 4:38 am
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/18/2010, 1:31 am
Re: Strip: Webbing loops - leave it complicated!
Greg H -- 11/16/2010, 9:58 pm
Re: Strip: Webbing loops - leave it complicated!
Bill Hamm -- 11/16/2010, 10:30 pm
Re: Strip: Webbing loops - cutting the slots
Kurt Maurer -- 11/15/2010, 10:19 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/15/2010, 9:48 pm
Re: Strip: Webbing loops - cutting the slots
Ian Johnson -- 11/15/2010, 9:53 pm
Re: Strip: Webbing loops - cutting the slots
Bill Hamm -- 11/15/2010, 9:55 pm