: I hope to build this
: boat

Will, when you get going, there are some things I would do differently if possible:
*i didn't shape the frames for fabric clearance between the stringers on the deck, I would do this so only the stringers and deckridge support the fabric.
*i would adjust the depth of the crossbars under the floor boards so that they touch the top of the keel for more support. I put in 1/4" filler spacers as an afterthought.
*I wanted to lash in pool noodles for fixed secondary floats - but they are seasonal at the dollar stores, so I ended up with milk cartons.
*after i drilled the holes I realized why Dave placed the front and rear carry loops so far in - there is no good way to tie a knot inside the frame after covering if you put the loops where I did.
*once I use up the sheet of marine ply I have, I am going to switch to regular lumberyard goods, varnished. I've realized my rec boats are never going to stay wet enough to need that level of protection.

have fun building and let me know if I can answer any questions about my particular build.