Doing a scarf joint on a board is not easy. Doing a scarf joint on a strip is almost a joke it's so easy and will not break at the joint.
Cutting accurate scarfs on actual boards is very difficult and because of the mass shape, any discrepancy in the angle or plane will not allow for overall bonding to take place.
Scarf the strips. You can easily do this with a jig on a radial arm or chop saw. A while back, someone posted a pic of a simple jig to use on a chop saw. I just use a spring clamp with a rail to keep the strip in alignment and I can glue up more than 10 in a minute. I can cut accurate ones on my radial arm in seconds too. They will not break.
Here's my gluing jig. Once it's clamped and glued, I gently pull it forward and do the next one. I work on the floor for long strips.
Messages In This Thread
- Strip: Butt joint issues?
Darel -- 12/28/2010, 10:03 pm- joints of many kinds *PIC*
Paul G. Jacobson -- 1/2/2011, 12:02 pm- Re: Strip: Butt joint issues?
Fred Gasper -- 12/30/2010, 7:57 am- Re: Strip: Butt joint issues?
Paul G. Jacobson -- 12/30/2010, 11:54 am
- Re: Strip: Butt joint issues?
G New -- 12/29/2010, 8:07 pm- Re: Strip: Butt joint issues?
Eric -- 12/29/2010, 7:14 pm- Re: Strip: Butt joint issues?
Rob Macks / Laughing Loon CC&K -- 12/29/2010, 2:16 pm- Re: Strip: Butt joint issues?
Dean -- 12/29/2010, 12:40 pm- Re: Strip: Butt joint issues?
Joy -- 12/29/2010, 9:43 am- Butt joints NOT over forms are bad
Paul G. Jacobson -- 12/29/2010, 1:43 pm- Re: Butt joints NOT over forms are bad
Al Edie -- 12/30/2010, 12:06 pm- Re: Butt joints NOT over forms are bad
Bill Hamm -- 12/30/2010, 1:48 pm
- Re: Butt joints NOT over forms are bad
Bill Hamm -- 12/29/2010, 3:02 pm - Re: Butt joints NOT over forms are bad
- Re: Strip: Butt joint issues?
Randy Echtinaw -- 12/29/2010, 10:56 am- Re: Strip: Butt joint issues? *PIC*
Joy -- 12/29/2010, 10:09 am - Re: Butt joints NOT over forms are bad
- Re: Strip: Butt joint issues?
Bill Hamm -- 12/29/2010, 8:28 am- Butt joint boards or strips? *PIC*
Jay Babina -- 12/29/2010, 8:19 am- Re: Butt joint boards or strips?
Bill Hamm -- 12/29/2010, 8:30 am
- Re: Strip: Butt joint issues?
Bill Hamm -- 12/29/2010, 8:07 am- Re: Strip: Butt joint issues?
Les Cheeseman -- 12/29/2010, 5:03 am- Re: Strip: Butt joint issues?
Randy Echtinaw -- 12/29/2010, 7:00 am- Re: Strip: Butt joint issues?
Darel -- 12/29/2010, 5:36 am- Still got that bottle of glue?
Paul G. Jacobson -- 12/31/2010, 7:22 am- Re: Still got that bottle of glue?
Darel -- 12/31/2010, 11:31 am
- Re: Still got that bottle of glue?
- Re: Strip: Butt joint issues?
- buy new glue
Paul G. Jacobson -- 12/29/2010, 4:27 am- Re: Strip: Butt joint issues?
Dave Houser -- 12/29/2010, 12:46 am- Re: Strip: Butt joint issues?
JohnK -- 12/29/2010, 2:23 am
- Re: Strip: Butt joint issues?
Charlie -- 12/28/2010, 11:20 pm- Re: Strip: Butt joint issues?
Bill Hamm -- 12/29/2010, 8:16 am
- Re: Strip: Butt joint issues?
Allan -- 12/28/2010, 10:36 pm- Re: Strip: Butt joint issues?
Stephen Troy -- 12/28/2010, 10:13 pm- Re: Strip: Butt joint issues? *NM* *PIC*
Darel -- 12/29/2010, 12:43 am- Re: Strip: Butt joint issues?
Bill Hamm -- 12/29/2010, 8:33 am
- Re: Strip: Butt joint issues?
mark j -- 12/28/2010, 11:19 pm- Re: Strip: Butt joint issues?
Darel -- 12/28/2010, 10:22 pm - Re: Strip: Butt joint issues?
- Re: Strip: Butt joint issues?
- joints of many kinds *PIC*