Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: New Skin coating
By:Paul G. Jacobson
Date: 3/13/2011, 1:21 am
In Response To: Re: Skin-on-Frame: New Skin coating (Dave Gentry)

: MDO, not MDF! One is plywood, the other fiberboard, if I'm not
: mistaken.

Either one should be fine for a workbench top. Both materials are inexpensive enough that you can flip it to use a fresh side, and then replace it when it gets really grungy.

For longevity I'd put a coat of paint or varnish on either, but it isn't necessary. Painting the top of the workbench is a great way to use up the dregs from a can of paint. A new color freshens up the workshop.

: Are you also saying you plan to coat the inside of your kayak with
: paint? I don't think that's necessary . . . .

Hmm. I wasn't quite sure what his plan was, either. I'd be tempted to rig up a deal to smoothly coat one side of my fabric with the PL, then skin the boat with that on the inside. Then I'd paint the outside. That technique should seal the fabric on both sides, and give a smooth outer finish.

But there would be plenty of problems to solve for getting a smooth coat of the PL on the fabric before it is stretched over some kind of frame.

If I was doing the coating commercially, I'd thin the PL to the consistency of printing ink, and apply it to the fabric as the fabric was going over a roller, with a stainless steel squeegee on top to scrape and smooth the PL and give a consistent thickness. Ideally I'd be able to salvage parts from a printing press.

Anybody got a guess on how many tubes of that stuff you need to coat a 17 foot kayak?

PGJ

Messages In This Thread

Skin-on-Frame: New Skin coating *PIC*
Dave Gentry -- 10/31/2010, 11:33 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 5:37 pm
Re: Skin-on-Frame: New Skin coating
TheLuckyOne -- 3/12/2011, 8:54 pm
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/13/2011, 12:36 am
workbench top of MDF?
Paul G. Jacobson -- 3/13/2011, 1:03 am
Re: workbench top of MDF?
Bill Hamm -- 3/14/2011, 12:15 am
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/12/2011, 10:45 pm
Re: Skin-on-Frame: New Skin coating
TheLuckyOne -- 3/13/2011, 10:30 am
Re: Skin-on-Frame: New Skin coating
Paul G. Jacobson -- 3/13/2011, 1:21 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/13/2011, 11:00 am
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/11/2011, 7:07 pm
Re: Skin-on-Frame: New Skin coating
Mike Bielski -- 3/11/2011, 10:46 pm
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 8:24 am
Re: Skin-on-Frame: New Skin coating
Mike Bielski -- 3/12/2011, 9:10 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 9:32 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/12/2011, 9:55 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 10:12 am
Re: Skin-on-Frame: New Skin coating *PIC*
Tim Abbott -- 3/12/2011, 8:46 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 3/12/2011, 9:33 am
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 10:00 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 3/12/2011, 7:39 am
Wetted-out Skin coating
Paul G. Jacobson -- 3/12/2011, 11:11 am
Re: Wetted-out Skin coating
Kudzu -- 3/12/2011, 11:20 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 3/11/2011, 10:48 pm
Re: Skin-on-Frame: New Skin coating
Tim Abbott -- 3/11/2011, 11:10 pm
Re: Skin-on-Frame: New Skin coating
John VanBuren -- 11/7/2010, 7:36 am
Re: Skin-on-Frame: New Skin coating
Bill Hamm -- 11/7/2010, 1:37 am
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/3/2010, 3:25 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 11/3/2010, 3:42 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/3/2010, 4:13 pm
Re: Skin-on-Frame: New Skin coating
Prasad Bhatla -- 11/6/2010, 6:39 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/7/2010, 1:11 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 11/2/2010, 3:11 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/2/2010, 4:59 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 11/2/2010, 7:04 pm
Re: Skin-on-Frame: New Skin coating
Will Clarke -- 11/3/2010, 10:09 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 11/2/2010, 7:53 pm
Re: Skin-on-Frame: New Skin coating
John lasky -- 11/2/2010, 11:23 am
Re: Skin-on-Frame: New Skin coating
Will Clarke -- 11/1/2010, 12:32 am
Re: Skin-on-Frame: New Skin coating
Ken Blanton -- 10/31/2010, 6:48 pm
Re: Skin-on-Frame: New Skin coating
Kudzu -- 10/31/2010, 4:29 pm
Re: Skin-on-Frame: New Skin coating
Dave Gentry -- 10/31/2010, 5:28 pm
Re: Skin-on-Frame: New Skin coating
Noel Bennett -- 10/31/2010, 4:26 pm