Re: Strip: coaming riser construction
In Response To: Re: Strip: coaming riser construction (Bill Hamm)
: I suspect that if you don't glass the riser you'll destroy it
: trying to bend the lip onto it, the bare strips specially with a
: sharp edge connection to the deck arn't all that strong.
: Need to cut the wood for the lip to whatever thickness it requires
: to be bent, depends much on the wood.
: Bill H.
Would you suggest glassing the inside and outside of the riser before bending the lip? Also what is a "standard" layup for the coaming and riser? I am using the thayercraft 3.2oz.
thanks
dave g
Messages In This Thread
- Strip: coaming riser construction
dave g -- 1/4/2011, 8:11 pm- Re: Strip: coaming riser construction
Bill Hamm -- 1/5/2011, 12:48 am- Re: Strip: coaming riser construction
dave g -- 1/5/2011, 1:16 am
- Re: Strip: coaming riser construction
Allan -- 1/5/2011, 2:22 am- Re: Strip: coaming riser construction
Clayton Plunkett -- 1/5/2011, 8:45 am- Re: Strip: coaming riser construction
Randy Echtinaw -- 1/5/2011, 9:14 am- Re: Strip: coaming riser construction
Clayton Plunkett -- 1/5/2011, 1:03 pm- Re: Strip: coaming riser construction
Bill Hamm -- 1/6/2011, 1:26 am - Re: Strip: coaming riser construction
- Re: Strip: coaming riser construction
dave g -- 1/5/2011, 7:28 pm - Re: Strip: coaming riser construction
- Re: Strip: coaming riser construction
- Re: Strip: coaming riser construction