Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Wood/grain quality for strips
By:Stephen Troy
Date: 1/7/2011, 7:16 pm
In Response To: Re: Strip: Wood/grain quality for strips *PIC* (Kurt Maurer)

Kurt,

Looking at that board, if it were quartersawn instead would that be a problem, or would not matter?

: Here in Texas, clear cedar is too dang expensive. I go to the local
: lumberyards that allow hand picking and search ..... and search
: ..... and search ..... for boards that are reasonably clear. If
: I happen to find a cache of clear boards, I select based on
: color and light weight. I have added more comments to my web
: pages here:
: http://mysite.verizon.net/NGC704/newOI/page_3.htm

: And here, at bottom of page:
: http://mysite.verizon.net/NGC704/newOI/Page_9.htm

: It's getting harder and harder to find lumberyards that allow hand
: picking because too many knuckleheads left the stacks in
: disarray too many times. So make sure you leave things NEATER
: than you found 'em whenever you are allowed to pick and choose.
: Heck, it's good policy wherever you go, period.

Messages In This Thread

Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 5:16 pm
Re: Strip: Wood/grain quality for strips *PIC*
Kurt Maurer -- 1/7/2011, 6:53 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/7/2011, 7:16 pm
Re: Strip: Wood/grain quality for strips
Kurt Maurer -- 1/7/2011, 8:37 pm
Re: Strip: Wood/grain quality for strips
Stephen Troy -- 1/8/2011, 12:38 pm
Re: Strip: Wood/grain quality for strips *PIC*
Tony Olsen -- 1/7/2011, 10:20 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 7:12 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/7/2011, 7:00 pm
Re: Strip: Wood/grain quality for strips
george jung -- 1/7/2011, 7:30 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/7/2011, 10:23 pm
Re: Strip: Wood/grain quality for strips
Don T -- 1/7/2011, 10:47 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:23 pm
Re: Strip: Wood/grain quality for strips
dave g -- 1/8/2011, 12:26 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:03 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:13 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 1:25 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 1:41 pm
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/8/2011, 6:08 pm
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:41 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/9/2011, 12:43 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 11:21 am
Re: Strip: Wood/grain quality for strips
dave g -- 1/9/2011, 12:51 am
Re: Strip: Wood/grain quality for strips
Al Edie -- 1/9/2011, 10:58 am
Re: Strip: Wood/grain quality for strips *PIC*
Tim Sheehan -- 1/8/2011, 12:59 am
Re: Strip: Wood/grain quality for strips
Randy Echtinaw -- 1/8/2011, 7:52 am
Re: Strip: Wood/grain quality for strips
Bill Hamm -- 1/8/2011, 8:40 am
Thanks!
Stephen Troy -- 1/8/2011, 8:09 pm
Re: Thanks!
Don T -- 1/8/2011, 9:08 pm
Re: Thanks!
ancient kayaker -- 1/14/2011, 6:03 pm