Date: 1/14/2011, 12:47 pm
: That's a good idea, I've got casement windows so using them isn't
: as easy. But I suspect I'll figure out a way to vent it outside
: either thru the wall or into the garage.
: A squirrel cage fan is both inexpensive and much quieter than the
: pancake fans, also can move a suitable quantity of air.
: Bill H.
If your objective is just to keep the epoxy out of the house, and if the workspace is reasonably sealed, not much air needs to be moved . As I mentioned, all I use is five computer ventilation fans which are very low power, but they do the job just fine, and the price was right. A small squirrel cage would also work great, and it would likely run on 110Volts, which would mean no battery charger would be required.
I was amazed at how well this setup worked. Even with warm epoxy while glassing the hull, there was not the tiniest hint of epoxy odor in the rest of the house during the work.
Best regards,
Allan Edie
Messages In This Thread
- Epoxy: Epoxy contact on skin
Clayton Plunkett -- 1/11/2011, 12:57 pm- Re: Epoxy: Epoxy contact on skin
Stephen Troy -- 1/11/2011, 1:10 pm- Re: Epoxy: Epoxy contact on skin
Malcolm Schweizer -- 1/11/2011, 1:34 pm- Re: Epoxy: Epoxy contact on skin
Clayton Plunkett -- 1/11/2011, 2:44 pm- Re: Epoxy: Epoxy contact on skin
Malcolm Schweizer -- 1/11/2011, 2:57 pm
- Re: Epoxy: Epoxy contact on skin
Michael McMann -- 1/11/2011, 3:08 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/12/2011, 12:48 am
- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/12/2011, 12:46 am- Re: Epoxy: Epoxy contact on skin
Malcolm Schweizer -- 1/12/2011, 3:10 am- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/12/2011, 6:00 am
- Waterless Hand Cleaner - product suggestions?
Doug S -- 1/12/2011, 12:14 pm- Re: Waterless Hand Cleaner - product suggestions?
Bill Hamm -- 1/12/2011, 2:29 pm- Thanks *NM*
Doug S -- 1/12/2011, 11:02 pm
- Gojo *NM*
Dan Caouette (CSFW) -- 1/12/2011, 3:11 pm - Thanks *NM*
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
JohnK -- 1/11/2011, 3:55 pm- Re: Epoxy: Epoxy contact on skin
eric Ogata -- 1/11/2011, 4:42 pm- Re: Epoxy: Epoxy contact on skin
Kurt Maurer -- 1/11/2011, 7:35 pm
- Re: Epoxy: Epoxy contact on skin
Paul Sylvester -- 1/11/2011, 8:25 pm- Re: Epoxy: Epoxy contact on skin
Richard hayes -- 1/11/2011, 9:15 pm
- Re: Epoxy: Epoxy contact on skin
Brian Nystrom -- 1/12/2011, 8:15 am- Re: Epoxy: Epoxy contact on skin
Clayton Plunkett -- 1/12/2011, 3:24 pm- Re: Epoxy: Epoxy contact on skin
mtkayak (Mike Trutwin) -- 1/13/2011, 5:23 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/13/2011, 6:55 pm- Re: Epoxy: Epoxy contact on skin
Al Edie -- 1/13/2011, 8:51 pm- Re: Epoxy: Epoxy contact on skin
Alex Ferguson -- 1/14/2011, 4:24 am- Re: Epoxy: Epoxy contact on skin
mtkayak (Mike Trutwin) -- 1/14/2011, 9:30 am- Re: Epoxy: Epoxy contact on skin
Al Edie -- 1/14/2011, 11:39 am- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/14/2011, 11:45 am- Re: Epoxy: Epoxy contact on skin
Al Edie -- 1/14/2011, 12:47 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/14/2011, 2:51 pm- Re: Epoxy: Epoxy contact on skin
Al Edie -- 1/14/2011, 4:27 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/14/2011, 5:37 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/16/2011, 3:30 am- Re: Epoxy: Epoxy contact on skin
Al Edie -- 1/16/2011, 3:45 am- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/16/2011, 8:46 am- Re: Epoxy: Epoxy contact on skin
Mike Savage -- 1/16/2011, 12:55 pm- Re: Epoxy: Epoxy contact on skin
Bill Hamm -- 1/17/2011, 12:36 am
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin
- Re: Epoxy: Epoxy contact on skin