Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Thanks all
By:Les Cheeseman
Date: 1/19/2011, 9:18 am
In Response To: Re: Thanks all (Bill Hamm)

: I'd want a featherboard behind the blade to hold the strip down,
: the blade behind the cut is going upwards and will want to lift
: the light strips, can be dangerous letting that happen, doesn't
: need much force on it, just keep the strip on the table.

: Bill H.

I use long inrun and outrun tables. An extended fence on the inrun. Feather boards pressing down before and after the blade, and a third one as close to the front of the blade as possible, holding the board tight to the fence, and adjusting it after each cut. Featherboards are intended to compensate for irregularities in board width.
Two fences won't do this and a jam could be seriously painful!!
My two pennyworth! Les C.

Messages In This Thread

Strip: Ripping better strips
Stephen Troy -- 1/15/2011, 11:29 pm
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 12:53 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:19 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 3:27 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:38 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 7:04 am
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 9:02 am
Re: Strip: Ripping better strips
Mike Savage -- 1/16/2011, 12:42 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 1:37 pm
Re: Strip: Ripping better strips
Ken Blanton -- 1/16/2011, 5:55 am
Re: Strip: Ripping better strips
Jay Babina -- 1/16/2011, 9:01 am
Re: Strip: Ripping better strips
Ian Cummins -- 1/16/2011, 5:08 pm
Re: Strip: Ripping better strips
Kurt Maurer -- 1/16/2011, 7:23 pm
Re: Strip: Zen
Ian Johnson -- 1/16/2011, 8:08 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 10:49 pm
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 10:58 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 11:04 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 9:10 pm
Re: Strip: Ripping better strips
Phil Nelson -- 1/16/2011, 10:03 pm
Re: Strip: Ripping better strips
ancient kayaker -- 1/18/2011, 10:39 am
Re: Strip: Ripping better strips
Phil Nelson -- 1/18/2011, 4:17 pm
Thanks all
Stephen Troy -- 1/17/2011, 12:31 am
Re: Thanks all
Paul G. Jacobson -- 1/17/2011, 4:02 am
Re: Thanks all
Bill Hamm -- 1/17/2011, 6:43 am
Featherboard use *PIC*
Paul G. Jacobson -- 1/17/2011, 6:50 pm
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 9:54 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:08 am
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 11:28 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:13 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:32 am
Re: Thanks all
Les Cheeseman -- 1/19/2011, 9:18 am
Re: Thanks all
Bill Hamm -- 1/19/2011, 9:28 am
infeeed.outfeed table extensions.
Paul G. Jacobson -- 1/19/2011, 8:00 pm
And the picture for that is--- *PIC*
Paul G. Jacobson -- 1/19/2011, 8:06 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:52 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:58 pm
Re: And the picture for that is---
Les Cheeseman -- 1/20/2011, 9:47 am
Re: And the picture for that is--- *PIC*
Etienne Muller - ireland -- 1/20/2011, 4:39 pm
Re: And the picture for that is---
Les Cheeseman -- 1/21/2011, 3:54 am
Re: Strip: Ripping better strips
Etienne Muller - ireland -- 1/17/2011, 5:07 am