Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Featherboard use
By:Les Cheeseman
Date: 1/20/2011, 9:54 am
In Response To: Featherboard use *PIC* (Paul G. Jacobson)

: Good point. Using a wide featherboard not only covers the blade,
: giving some protectionto fingers, but it can also cover the
: output side, too.

: Even if the blade is 10" in diamaeter, you won't get 10"
: of exposure on the top of the table. Maybe 3 to 5 inches will be
: exposed, depending on how high you raise the blade above the
: table. You can cover most or all of that with a featherboard
: made from a nominal 1x6.

: Illustration below should give an idea of how that works.

: PGJ

Hi Paul.

I like the look of that arangement!
Have you not found the need for a thin shim of some sort to stop the fingers
from binding against the face of the fence and stopping them from flexing?
Just a thought!
Les C.

Messages In This Thread

Strip: Ripping better strips
Stephen Troy -- 1/15/2011, 11:29 pm
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 12:53 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:19 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 3:27 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:38 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 7:04 am
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 9:02 am
Re: Strip: Ripping better strips
Mike Savage -- 1/16/2011, 12:42 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 1:37 pm
Re: Strip: Ripping better strips
Ken Blanton -- 1/16/2011, 5:55 am
Re: Strip: Ripping better strips
Jay Babina -- 1/16/2011, 9:01 am
Re: Strip: Ripping better strips
Ian Cummins -- 1/16/2011, 5:08 pm
Re: Strip: Ripping better strips
Kurt Maurer -- 1/16/2011, 7:23 pm
Re: Strip: Zen
Ian Johnson -- 1/16/2011, 8:08 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 10:49 pm
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 10:58 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 11:04 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 9:10 pm
Re: Strip: Ripping better strips
Phil Nelson -- 1/16/2011, 10:03 pm
Re: Strip: Ripping better strips
ancient kayaker -- 1/18/2011, 10:39 am
Re: Strip: Ripping better strips
Phil Nelson -- 1/18/2011, 4:17 pm
Thanks all
Stephen Troy -- 1/17/2011, 12:31 am
Re: Thanks all
Paul G. Jacobson -- 1/17/2011, 4:02 am
Re: Thanks all
Bill Hamm -- 1/17/2011, 6:43 am
Featherboard use *PIC*
Paul G. Jacobson -- 1/17/2011, 6:50 pm
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 9:54 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:08 am
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 11:28 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:13 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:32 am
Re: Thanks all
Les Cheeseman -- 1/19/2011, 9:18 am
Re: Thanks all
Bill Hamm -- 1/19/2011, 9:28 am
infeeed.outfeed table extensions.
Paul G. Jacobson -- 1/19/2011, 8:00 pm
And the picture for that is--- *PIC*
Paul G. Jacobson -- 1/19/2011, 8:06 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:52 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:58 pm
Re: And the picture for that is---
Les Cheeseman -- 1/20/2011, 9:47 am
Re: And the picture for that is--- *PIC*
Etienne Muller - ireland -- 1/20/2011, 4:39 pm
Re: And the picture for that is---
Les Cheeseman -- 1/21/2011, 3:54 am
Re: Strip: Ripping better strips
Etienne Muller - ireland -- 1/17/2011, 5:07 am