Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Split the boat
By:Paul Rummler
Date: 1/20/2011, 10:03 pm
In Response To: Re: Epoxy: Split the boat (Allan)

: How long have you waited for it to set? Often incorrectly mixed
: batches will cure if given enough time.

It has been sitting over a week and the temperature has been in the 70's for most of that time. I was hoping it would set if I waited. I've been using a pump and I had just used the same supplies to successfully make my hatch lips. I'm also sure I counted correctly. I will waste some before trying this again.

Messages In This Thread

Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 8:25 pm
Re: Epoxy: Split the boat
Allan -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 10:03 pm
Re: Epoxy: Split the boat
Jay Babina -- 1/21/2011, 8:02 am
Re: Epoxy: Split the boat
Mike Bielski -- 1/21/2011, 8:09 am
Go Mike
Kurt Maurer -- 1/21/2011, 7:11 pm
Re: Epoxy: Split the boat
John D. -- 1/21/2011, 1:39 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 6:03 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 6:39 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 7:13 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 8:57 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 9:07 am
Re: Epoxy: Split the boat
Eric -- 1/21/2011, 11:25 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:04 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:05 pm
Re: Epoxy: Split the boat
dhwdaniels -- 1/21/2011, 5:22 pm
Epoxy: getting good mixes *PIC*
Paul G. Jacobson -- 1/21/2011, 4:26 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:47 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:54 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/21/2011, 11:42 pm
Re: Epoxy: Split the boat *PIC*
Etienne Muller - ireland -- 1/21/2011, 7:34 am
Re: Epoxy: Split the boat
mark j -- 1/21/2011, 9:37 am
Re: Epoxy: Split the boat
Etienne Muller - ireland -- 1/21/2011, 5:39 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 5:50 pm
Re: Epoxy: Split the boat
dave g -- 1/21/2011, 9:02 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 9:02 am
Re: Epoxy: Split the boat
Robert N Pruden -- 1/21/2011, 10:10 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 11:15 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 11:30 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:11 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:07 pm
Bad Epoxy, But Don't Split the boat
Paul G. Jacobson -- 1/21/2011, 3:18 pm
The boat is split
Paul Rummler -- 1/21/2011, 11:33 pm
Re: The boat is split
Bill Hamm -- 1/22/2011, 1:02 am
Re: The boat is split
Al Edie -- 1/23/2011, 1:04 pm
Re: The boat is split
Bill Hamm -- 1/24/2011, 12:41 am
Aw #@&*!
Paul G. Jacobson -- 1/24/2011, 4:32 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 8:50 am
Re: Aw #@&*!
Al Edie -- 1/24/2011, 10:39 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 2:33 pm
Re: Aw #@&*!
Mike Savage -- 1/25/2011, 7:04 am
Re: Aw #@&*!
Bill Hamm -- 1/26/2011, 2:07 am
Re: Aw #@&*!
Mike Savage -- 1/26/2011, 2:42 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:45 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:46 am
Re: Aw #@&*!
Mike Savage -- 1/27/2011, 5:53 am
Re: Aw #@&*!
Robert N Pruden -- 1/26/2011, 9:05 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:47 am