Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Split the boat
By:dhwdaniels
Date: 1/21/2011, 5:22 pm
In Response To: Re: Epoxy: Split the boat (Bill Hamm)

: I use paint mixing cups from your local automotive paint supply
: outlet, every town's got at least one. They are cheap, clean and
: consistant in size, also don't have any bad reactions with the
: epoxy. And...you can clean them once the epoxy is set up, they
: clean up looking like new.

: I pay about 25 cents each in quantity, go thru cases of them here.

: Bill H.

Here in the Netherlands I use epoxy and hardener that has to be mixed in a weight ratio 2 : 1
So I cannot use volumes as a messure but only weight. I use a small electronic scale with which I can
measure on +- 0.5 g to a maximum of 5 kg. Mostly I use small batches of 80 to 120 g epoxy and 40 to 60 g hardener.
I have the epoxy and hardener in small plastic containers with a small hole in the cap to squese a little in the mix cup.
My brother in law sells the epoxy the call it H100. I have no idee who is the manufacture but it works great.
The hardeners specific weight is much higher then that from the epoxy so volume fraction of 2 : 1 will not be correct.

Greetings to you all
Daan Daniels

Messages In This Thread

Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 8:25 pm
Re: Epoxy: Split the boat
Allan -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/20/2011, 10:03 pm
Re: Epoxy: Split the boat
Jay Babina -- 1/21/2011, 8:02 am
Re: Epoxy: Split the boat
Mike Bielski -- 1/21/2011, 8:09 am
Go Mike
Kurt Maurer -- 1/21/2011, 7:11 pm
Re: Epoxy: Split the boat
John D. -- 1/21/2011, 1:39 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/20/2011, 8:42 pm
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 6:03 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 6:39 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 7:13 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 8:57 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 9:07 am
Re: Epoxy: Split the boat
Eric -- 1/21/2011, 11:25 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:04 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:05 pm
Re: Epoxy: Split the boat
dhwdaniels -- 1/21/2011, 5:22 pm
Epoxy: getting good mixes *PIC*
Paul G. Jacobson -- 1/21/2011, 4:26 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:47 pm
Re: Epoxy: getting good mixes
Bill Hamm -- 1/21/2011, 5:54 pm
Re: Epoxy: Split the boat
Paul Rummler -- 1/21/2011, 11:42 pm
Re: Epoxy: Split the boat *PIC*
Etienne Muller - ireland -- 1/21/2011, 7:34 am
Re: Epoxy: Split the boat
mark j -- 1/21/2011, 9:37 am
Re: Epoxy: Split the boat
Etienne Muller - ireland -- 1/21/2011, 5:39 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 5:50 pm
Re: Epoxy: Split the boat
dave g -- 1/21/2011, 9:02 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 9:02 am
Re: Epoxy: Split the boat
Robert N Pruden -- 1/21/2011, 10:10 am
Re: Epoxy: Split the boat
Randy Echtinaw -- 1/21/2011, 11:15 am
Re: Epoxy: Split the boat
Les Cheeseman -- 1/21/2011, 11:30 am
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:11 pm
Re: Epoxy: Split the boat
Bill Hamm -- 1/21/2011, 3:07 pm
Bad Epoxy, But Don't Split the boat
Paul G. Jacobson -- 1/21/2011, 3:18 pm
The boat is split
Paul Rummler -- 1/21/2011, 11:33 pm
Re: The boat is split
Bill Hamm -- 1/22/2011, 1:02 am
Re: The boat is split
Al Edie -- 1/23/2011, 1:04 pm
Re: The boat is split
Bill Hamm -- 1/24/2011, 12:41 am
Aw #@&*!
Paul G. Jacobson -- 1/24/2011, 4:32 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 8:50 am
Re: Aw #@&*!
Al Edie -- 1/24/2011, 10:39 am
Re: Aw #@&*!
Bill Hamm -- 1/24/2011, 2:33 pm
Re: Aw #@&*!
Mike Savage -- 1/25/2011, 7:04 am
Re: Aw #@&*!
Bill Hamm -- 1/26/2011, 2:07 am
Re: Aw #@&*!
Mike Savage -- 1/26/2011, 2:42 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:45 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:46 am
Re: Aw #@&*!
Mike Savage -- 1/27/2011, 5:53 am
Re: Aw #@&*!
Robert N Pruden -- 1/26/2011, 9:05 am
Re: Aw #@&*!
Bill Hamm -- 1/27/2011, 12:47 am