Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: dealing with epoxy runs
By:Allan
Date: 2/1/2011, 10:02 pm
In Response To: Re: Strip: dealing with epoxy runs (Todd O)

: How about after the epoxy is fully cured? The runs have been on for
: about 2 weeks now.

A cabinet scraper is still the best tool for the job and will handle fully cured epoxy easily, especially if the scraper is properly "sharpened".

Messages In This Thread

Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 2:47 pm
Re: Strip: dealing with epoxy runs
Mike Savage -- 2/1/2011, 3:01 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 3:52 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 9:27 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 10:02 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 10:44 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 10:59 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 1:51 am
There's scrapers and scrapers
Jay Babina -- 2/2/2011, 8:18 am
Re: Strip: dealing with epoxy runs
Charlie -- 2/1/2011, 3:57 pm
Re: Strip: dealing with epoxy runs *PIC*
Tony Olsen -- 2/1/2011, 6:07 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 1:52 am
Re: Strip: dealing with epoxy runs
Todd O -- 2/2/2011, 2:52 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 3:53 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/2/2011, 8:57 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/3/2011, 2:37 am
Re: Strip: dealing with epoxy runs
Todd O -- 2/3/2011, 10:45 am
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/3/2011, 11:26 am
Re: Strip: dealing with epoxy runs
Eric -- 2/2/2011, 1:21 pm
Re: Strip: dealing with epoxy runs
Etienne Muller - ireland -- 2/3/2011, 3:14 pm
epoxy runs - a better alternative
mick allen -- 2/4/2011, 9:41 pm