Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: dealing with epoxy runs
By:Bill Hamm
Date: 2/2/2011, 1:51 am
In Response To: Re: Strip: dealing with epoxy runs (Allan)

: There are a number of variations on the technique. What they have
: in common is producing a smooth flat edge and then creating a
: burr on that edge.

: Your best bet is to search for some descriptions of the technique
: and some youtube videos demonstrating how to do it. Some people
: have more success with one technique while others find a
: different one works best for them. So I would suggest looking at
: a few and if the first one you try doesn't seem to work for you,
: try a slightly different one.

: Just google "sharpening cabinet scraper".

Watch a couple vids and practice, they really arn't hard to shape, sharpening isn't really what you're doing, it's almost anti-sharpening ;)

Bill H.

Messages In This Thread

Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 2:47 pm
Re: Strip: dealing with epoxy runs
Mike Savage -- 2/1/2011, 3:01 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 3:52 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 9:27 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 10:02 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/1/2011, 10:44 pm
Re: Strip: dealing with epoxy runs
Allan -- 2/1/2011, 10:59 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 1:51 am
There's scrapers and scrapers
Jay Babina -- 2/2/2011, 8:18 am
Re: Strip: dealing with epoxy runs
Charlie -- 2/1/2011, 3:57 pm
Re: Strip: dealing with epoxy runs *PIC*
Tony Olsen -- 2/1/2011, 6:07 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 1:52 am
Re: Strip: dealing with epoxy runs
Todd O -- 2/2/2011, 2:52 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/2/2011, 3:53 pm
Re: Strip: dealing with epoxy runs
Todd O -- 2/2/2011, 8:57 pm
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/3/2011, 2:37 am
Re: Strip: dealing with epoxy runs
Todd O -- 2/3/2011, 10:45 am
Re: Strip: dealing with epoxy runs
Bill Hamm -- 2/3/2011, 11:26 am
Re: Strip: dealing with epoxy runs
Eric -- 2/2/2011, 1:21 pm
Re: Strip: dealing with epoxy runs
Etienne Muller - ireland -- 2/3/2011, 3:14 pm
epoxy runs - a better alternative
mick allen -- 2/4/2011, 9:41 pm