: I've got 3/4" fiberglass sleeve (I think) from Soller, it'll
: fairly easily make that bend but flattens at the bottom of the
: curve. It'll require some sort of mandrel to form the sleeve
: over, not sure what you'd use for that.

: Smaller diameter sleeve may well make the bend easier, still will
: require a mandrel.

: Bill H.

Thanks very much for that information Bill. I was expecting for the mandrel I could use the same clear plastic tube I used for constructing the traditional style of fitting. I put electrical cable inside the tube so the sleeve would not be able to compress the tube.

Ric