Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Mixing small ammounts of epoxy
By:Les Cheeseman
Date: 2/18/2011, 10:50 am
In Response To: Epoxy: Mixing small ammounts of epoxy (Malcolm Schweizer)

: Hello all,

: I buy my epoxy by the gallon. There are times when I need just a
: small ammount- less than what the pump puts out by far. I filled
: some squeeze bottles with resin and hardener to allow for
: squeezing out just what I need. However, it is a guessing game
: on the mix. I'm wondering what you guys do to get a good mix
: when doing small glue-ups with epoxy. I thought about getting
: one of those plastic medicine spoons with the hollow handle with
: gradations on it.

: By the way, while I'm on it, although above I'm referring to 105
: resin with 207 hardener, am I the only one that has found that
: West System G5 is VERY sensitive to mix ratios? You really have
: to be sure to get the exact ammounts of resin and hardener with
: that stuff. Also, I'm wondering, is the new G20 flexible stuff
: supposed to have a reddish tint to the hardener? I was at the
: boatyard yesterday getting some more resin and I saw the G20 and
: the hardener was reddish-brown. It looked like what G5 looks
: like when it gets old. Just curious.

I am interested to note that several people on this thread mix by weight rather than by volume as
stipulated by most manufacturers.
Do we know that the specific gravity of resin and hardner are the same, because if they are't then
the proportions of the mix will not be correct? The error would be even more critical when mixing small amounts.

Les. C.

Messages In This Thread

Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/17/2011, 10:40 am
Re: Epoxy: Mixing small ammounts of epoxy
Wesley Ewell -- 2/17/2011, 10:52 am
Re: Epoxy: Mixing small ammounts of epoxy
Kirk Fredericks - Farback Carpentry and Automation -- 2/17/2011, 12:35 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/17/2011, 1:37 pm
Re: Epoxy: Mixing small ammounts of epoxy
Matt Brammer -- 2/17/2011, 10:58 am
Re: Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/17/2011, 12:21 pm
Re: Epoxy: Mixing small ammounts of epoxy
Sam McFadden -- 2/17/2011, 11:12 am
Re: Epoxy: Mixing small ammounts of epoxy
don -- 2/17/2011, 11:52 am
10ml syringes
Simeon -- 2/17/2011, 3:04 pm
Re: Epoxy: Mixing small ammounts of epoxy
Mike Savage -- 2/17/2011, 3:26 pm
Re: Epoxy: Mixing small ammounts of epoxy
Paul G. Jacobson -- 2/17/2011, 11:29 am
Re: Epoxy: Mixing small ammounts of epoxy
mtkayak (Mike Trutwin) -- 2/17/2011, 1:21 pm
Re: Epoxy: Mixing small ammounts of epoxy
Ian Johnson -- 2/17/2011, 4:33 pm
scale
Mike Bielski -- 2/17/2011, 2:03 pm
Re: Epoxy: Mixing small ammounts of epoxy
Eric -- 2/17/2011, 2:52 pm
Re: Epoxy: Mixing small amounts of epoxy
Allan -- 2/17/2011, 4:47 pm
Re: Epoxy: Mixing small ammounts of epoxy
richt -- 2/17/2011, 6:11 pm
Re: Epoxy: Mixing small ammounts of epoxy
ancient kayaker -- 2/17/2011, 6:38 pm
Re: No Syringes
Ken Blanton -- 2/17/2011, 7:21 pm
Re: No Syringes
Malcolm Schweizer -- 2/18/2011, 9:35 am
Re: No Syringes
Bill Hamm -- 2/18/2011, 9:56 am
Re: No Syringes
Allan -- 2/18/2011, 3:45 pm
Re: Epoxy: Mixing small ammounts of epoxy
Glen Smith -- 2/17/2011, 7:57 pm
Re: Epoxy: Mixing small ammounts of epoxy *PIC*
Dave Houser -- 2/17/2011, 9:58 pm
Re: Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/18/2011, 9:39 am
Re: Epoxy: Mixing small ammounts of epoxy
Mark Joyse -- 2/18/2011, 9:47 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 9:58 am
I use glue syringes
Brian Nystrom -- 2/18/2011, 7:11 am
Re: Epoxy: Mixing small ammounts of epoxy
Jay Babina -- 2/18/2011, 7:45 am
Looks like Ken Blanton is doing the same
Jay Babina -- 2/18/2011, 7:47 am
Re: Epoxy: Mixing small ammounts of epoxy
george jung -- 2/18/2011, 11:14 pm
Re: Epoxy: Mixing small ammounts of epoxy
Ken Blanton -- 2/19/2011, 5:46 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/19/2011, 6:18 am
Re: Epoxy: Mixing small ammounts of epoxy
Ken Blanton -- 2/19/2011, 8:31 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/19/2011, 10:06 am
Re: Epoxy: Mixing small ammounts of epoxy
Les Cheeseman -- 2/18/2011, 10:50 am
Re: Epoxy: Mixing small ammounts of epoxy
Mark Joyse -- 2/18/2011, 10:55 am
Re: Epoxy: Mixing small ammounts of epoxy
dhwdaniels -- 2/18/2011, 2:28 pm
Re: Epoxy: Mixing small ammounts of epoxy
JohnK -- 2/18/2011, 6:05 pm
Re: Epoxy: Mixing small ammounts of epoxy
Robert N Pruden -- 2/18/2011, 12:02 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 2:05 pm
Re: Epoxy: Mixing small ammounts of epoxy
Donovan -- 2/18/2011, 9:26 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 9:36 pm
Re: Epoxy: Mixing small ammounts of epoxy
ancient kayaker -- 2/18/2011, 10:45 pm