I've finished stripping the hull of my Firestar and did a 60 grit sanding. The stern is slightly offline as can be seen by the keel line following the stern to the rest of the boat in this picture:

https://picasaweb.google.com/114087146263830962647/FirestarBuild?authkey=Gv1sRgCKye4-2U4-eCCA&feat=email#5575104061434231826

Is this something I need to worry about? I tried shifting the form under the stern but it had little effect on the stern's position. I'm guessing that once I fiberglass the outside of the hull I'll lock the position of the stern in forever. If I do try to correct the stern position what would be the best approach to take? Wondering if I'll need to get used to paddling in circles if it's left as-is.

A few other pics: https://picasaweb.google.com/lh/sredir?uname=114087146263830962647&target=ALBUM&id=5575103947069727233&authkey=Gv1sRgCKye4-2U4-eCCA&feat=email

Mark