Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: No Syringes
By:Allan
Date: 2/18/2011, 3:45 pm
In Response To: Re: No Syringes (Ken Blanton)

: I use squeeze bottles and mix the epoxy on a nonporous surface ...
: such as a piece of plastic. I simply squeeze out a line of resin
: and hardener in the same proportion as mixing ratio. As an
: example ... say it's a 3:1 mix ... I squeeze out a line of resin
: 3" long and a line of hardener 1" long and mix away.

: Ken Blanton

That is a bit risky with some brands of epoxy..

The one I use , Bote-Cote has quite a difference in the viscosity of the epoxy and the hardener. The two lines produced if you squeeze it out naturally tend to differ in width and height, so comparing the lengths may not be accurate. The syringes avoid that problem.

Messages In This Thread

Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/17/2011, 10:40 am
Re: Epoxy: Mixing small ammounts of epoxy
Wesley Ewell -- 2/17/2011, 10:52 am
Re: Epoxy: Mixing small ammounts of epoxy
Kirk Fredericks - Farback Carpentry and Automation -- 2/17/2011, 12:35 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/17/2011, 1:37 pm
Re: Epoxy: Mixing small ammounts of epoxy
Matt Brammer -- 2/17/2011, 10:58 am
Re: Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/17/2011, 12:21 pm
Re: Epoxy: Mixing small ammounts of epoxy
Sam McFadden -- 2/17/2011, 11:12 am
Re: Epoxy: Mixing small ammounts of epoxy
don -- 2/17/2011, 11:52 am
10ml syringes
Simeon -- 2/17/2011, 3:04 pm
Re: Epoxy: Mixing small ammounts of epoxy
Mike Savage -- 2/17/2011, 3:26 pm
Re: Epoxy: Mixing small ammounts of epoxy
Paul G. Jacobson -- 2/17/2011, 11:29 am
Re: Epoxy: Mixing small ammounts of epoxy
mtkayak (Mike Trutwin) -- 2/17/2011, 1:21 pm
Re: Epoxy: Mixing small ammounts of epoxy
Ian Johnson -- 2/17/2011, 4:33 pm
scale
Mike Bielski -- 2/17/2011, 2:03 pm
Re: Epoxy: Mixing small ammounts of epoxy
Eric -- 2/17/2011, 2:52 pm
Re: Epoxy: Mixing small amounts of epoxy
Allan -- 2/17/2011, 4:47 pm
Re: Epoxy: Mixing small ammounts of epoxy
richt -- 2/17/2011, 6:11 pm
Re: Epoxy: Mixing small ammounts of epoxy
ancient kayaker -- 2/17/2011, 6:38 pm
Re: No Syringes
Ken Blanton -- 2/17/2011, 7:21 pm
Re: No Syringes
Malcolm Schweizer -- 2/18/2011, 9:35 am
Re: No Syringes
Bill Hamm -- 2/18/2011, 9:56 am
Re: No Syringes
Allan -- 2/18/2011, 3:45 pm
Re: Epoxy: Mixing small ammounts of epoxy
Glen Smith -- 2/17/2011, 7:57 pm
Re: Epoxy: Mixing small ammounts of epoxy *PIC*
Dave Houser -- 2/17/2011, 9:58 pm
Re: Epoxy: Mixing small ammounts of epoxy
Malcolm Schweizer -- 2/18/2011, 9:39 am
Re: Epoxy: Mixing small ammounts of epoxy
Mark Joyse -- 2/18/2011, 9:47 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 9:58 am
I use glue syringes
Brian Nystrom -- 2/18/2011, 7:11 am
Re: Epoxy: Mixing small ammounts of epoxy
Jay Babina -- 2/18/2011, 7:45 am
Looks like Ken Blanton is doing the same
Jay Babina -- 2/18/2011, 7:47 am
Re: Epoxy: Mixing small ammounts of epoxy
george jung -- 2/18/2011, 11:14 pm
Re: Epoxy: Mixing small ammounts of epoxy
Ken Blanton -- 2/19/2011, 5:46 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/19/2011, 6:18 am
Re: Epoxy: Mixing small ammounts of epoxy
Ken Blanton -- 2/19/2011, 8:31 am
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/19/2011, 10:06 am
Re: Epoxy: Mixing small ammounts of epoxy
Les Cheeseman -- 2/18/2011, 10:50 am
Re: Epoxy: Mixing small ammounts of epoxy
Mark Joyse -- 2/18/2011, 10:55 am
Re: Epoxy: Mixing small ammounts of epoxy
dhwdaniels -- 2/18/2011, 2:28 pm
Re: Epoxy: Mixing small ammounts of epoxy
JohnK -- 2/18/2011, 6:05 pm
Re: Epoxy: Mixing small ammounts of epoxy
Robert N Pruden -- 2/18/2011, 12:02 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 2:05 pm
Re: Epoxy: Mixing small ammounts of epoxy
Donovan -- 2/18/2011, 9:26 pm
Re: Epoxy: Mixing small ammounts of epoxy
Bill Hamm -- 2/18/2011, 9:36 pm
Re: Epoxy: Mixing small ammounts of epoxy
ancient kayaker -- 2/18/2011, 10:45 pm