Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Scarffing with finger jointer
By:Paul R
Date: 2/18/2011, 9:03 pm
In Response To: Strip: Scarffing with finger jointer (JohnK)

I started with finger joints and it worked okay but was a lot of work. If you try make sure you move them on edge as I had some joints not hold moving them flat. I also had difficulty getting the strips to line up. I won't bother on the second build.

Messages In This Thread

Strip: Scarffing with finger jointer
JohnK -- 2/18/2011, 7:43 pm
Re: Strip: Scarffing with finger jointer
Paul R -- 2/18/2011, 9:03 pm
Re: Strip: Scarffing with finger jointer
JohnK -- 2/19/2011, 8:05 pm
Re: Strip: Scarffing with finger jointer
Paul R -- 2/19/2011, 8:47 pm
Re: Scarfing with finger jointer--don't bother *PIC*
Paul G. Jacobson -- 2/19/2011, 1:00 pm
Re: Scarfing with finger jointer--don't bother
Michael -- 2/19/2011, 3:05 pm
Re: Scarfing with finger jointer--don't bother *PIC*
Paul G. Jacobson -- 2/20/2011, 5:52 am
Re: Scarfing with finger jointer--don't bother
Michael -- 2/20/2011, 11:09 am
Re: Scarfing with finger jointer--don't bother
Bill Hamm -- 2/19/2011, 5:09 pm
Re: Scarfing with finger jointer--don't bother *PIC*
Kurt Maurer -- 2/19/2011, 6:56 pm
Re: Scarfing with finger jointer--don't bother
Bill Hamm -- 2/21/2011, 12:55 am
Re: Scarfing with finger jointer--don't bother
Bill Hamm -- 2/21/2011, 1:13 am
Re: Scarfing out knots
Paul G. Jacobson -- 2/21/2011, 3:21 am
Re: Scarfing out knots
Etienne Muller - ireland -- 2/21/2011, 5:15 am
Re: Scarfing out knots
Bill Hamm -- 2/21/2011, 1:41 pm
OT: other type of scarf *PIC*
Paul G. Jacobson -- 2/21/2011, 3:31 pm
Re: OT: other type of scarf
Bill Hamm -- 2/22/2011, 1:42 am
Re: Scarfing out knots
Bill Hamm -- 2/21/2011, 1:40 pm
Re: Strip: Scarffing with finger jointer
JohnK -- 2/19/2011, 8:08 pm
Re: Strip: Scarffing with finger jointer
Paul G. Jacobson -- 2/20/2011, 4:58 am
Re: Strip: Scarffing with finger jointer
ancient kayaker -- 2/25/2011, 10:51 pm