Re: S&G: Filleting the deck to hull - the inside j
By:Duane Strosaker
Date: 3/2/2011, 4:17 pm
Date: 3/2/2011, 4:17 pm
In Response To: S&G: Filleting the deck to hull - the inside job (Sean Dawe)
The inside seam is tough. I fillet the inside seam as far as I can reach by hand in the cockpit and hatches. Same for the fiberglass tape, which I pre-wet and roll out. Then for that last couple feet at the ends, I tilt the kayak up slightly and let some slightly thickened epoxy slide down the seam to the bow. That just seals everything up in case some water gets in there and the excess becomes the end pours.
Messages In This Thread
- S&G: Filleting the deck to hull - the inside job
Sean Dawe -- 3/1/2011, 7:57 am- Re: S&G: Filleting the deck to hull - the inside j
Bill Hamm -- 3/2/2011, 1:20 am- Re: S&G: Filleting the deck to hull - the inside j
Paul Sylvester -- 3/5/2011, 9:48 am- Re: S&G: Filleting the deck to hull - the inside j
Bill Hamm -- 3/6/2011, 1:06 am
- Re: S&G: Filleting the deck to hull - the inside j
- Re: S&G: Filleting the deck to hull - the inside j
Sean Dawe -- 3/2/2011, 7:43 am- Re: S&G: Filleting the deck to hull - the inside j
Charles Robinson -- 3/2/2011, 8:36 am- Re: S&G: Filleting the deck to hull - the inside j
Robert N Pruden -- 3/7/2011, 11:19 am - Re: S&G: Filleting the deck to hull - the inside j
- Re: S&G: Filleting the deck to hull - the inside j
Duane Strosaker -- 3/2/2011, 4:17 pm- Re: S&G: Filleting the deck to hull - the inside j
JohnK -- 3/4/2011, 5:33 am- Re: S&G: Filleting the deck to hull - the inside j *PIC*
Paul G. Jacobson -- 3/4/2011, 9:30 pm- Re: S&G: Filleting the deck to hull - the inside j
Bill Hamm -- 3/5/2011, 6:23 am- Re: S&G: Filleting the deck to hull - the inside j
Bill Hamm -- 3/5/2011, 6:26 am- Re: S&G: fresh caulking tubes for epoxy
Paul G. Jacobson -- 3/5/2011, 5:44 pm- Re: S&G: fresh caulking tubes for epoxy
Bill Hamm -- 3/6/2011, 1:07 am
- Re: S&G: fresh caulking tubes for epoxy
- Re: S&G: fresh caulking tubes for epoxy
- Re: S&G: Filleting the deck to hull - the inside j
- Re: S&G: Filleting the deck to hull - the inside j
- Re: S&G: Filleting the deck to hull - the inside j
Sean Dawe -- 3/7/2011, 12:17 pm- Re: S&G: Filleting the deck to hull - the inside j
Bill Hamm -- 3/8/2011, 12:30 am
- Re: S&G: Filleting the deck to hull - the inside j
- Re: S&G: Filleting the deck to hull - the inside j