Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

No screws needed
By:Jay Babina
Date: 3/10/2011, 9:10 am
In Response To: Re: Material: Rubber Hatches - Fastening (Bill Hamm)

I've done 7 kayaks with mostly Valley hatches and one with Kajak sport. I drill out the bolt indentations and epoxy them in after roughing up the glue surface. After that hardens, I flood the top surface area with blackened epoxy that fills the bold holes and actually creates epoxy rivets. When it's done it looks like the lip assembly was molded in the boat. As far as removing the lip? Why? They never go unless your boat gets smashed in some freak accident. For a cheaper deal, you can use Plastic Beckson hatches wich i used on one boat and they were totally dry. I used the pry out type and put a little grab loop of line so I wouldn't need a tool. Don't use the screw in type - they can warp and catch sand too and lock up. It's not easy to make 100% water tight wood hatches and I value that.

http://www.outer-island.com/Kajakhatch.html

Messages In This Thread

Material: Rubber Hatches - Fastening
Sean Dawe -- 3/8/2011, 9:45 am
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/8/2011, 12:31 pm
Re: Material: Rubber Hatches - Fastening *NM*
Paul K -- 3/8/2011, 5:42 pm
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/8/2011, 12:42 pm
Re: Material: Rubber Hatches - Fastening
Sean Dawe -- 3/8/2011, 1:42 pm
Re: Material: Rubber Hatches - Fastening
Brian Nystrom -- 3/9/2011, 6:41 am
Re: Material: Rubber Hatches - Fastening
Sean Dawe -- 3/9/2011, 1:15 pm
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/10/2011, 12:41 am
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/10/2011, 12:38 am
Re: Material: Rubber Hatches - Fastening
Paul Sylvester -- 3/13/2011, 8:17 am
Re: Material: Rubber Hatches - Fastening
Brian Nystrom -- 3/13/2011, 11:58 am
No screws needed
Jay Babina -- 3/10/2011, 9:10 am
Re: No screws needed
Bill Hamm -- 3/10/2011, 2:52 pm
Re: No screws needed
Paul G. Jacobson -- 3/11/2011, 6:50 am
Re: No screws needed
Bill Hamm -- 3/11/2011, 7:11 am
Re: Material: Rubber Hatches - Fastening *PIC*
Dave Houser -- 3/8/2011, 3:24 pm
Re: Material: Rubber Hatches - Fastening
Sean Dawe -- 3/8/2011, 9:49 pm
Re: Material: Rubber Hatches - Fastening
Malcolm Schweizer -- 3/9/2011, 8:39 am
Re: Material: Rubber Hatches - Fastening
Malcolm Schweizer -- 3/9/2011, 8:35 am
Re: Material: Rubber Hatches - Fastening
Sean Dawe -- 3/9/2011, 8:44 am
Re: Material: Rubber Hatches - Fastening
Malcolm Schweizer -- 3/9/2011, 12:08 pm
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/10/2011, 12:43 am
Re: Material: Rubber Hatches - Fastening
dhwdaniels -- 3/10/2011, 4:48 am
Re: Material: Rubber Hatches - Fastening
Bill Hamm -- 3/10/2011, 2:54 pm
Re: Material: Rubber Hatches - Fastening
Sean Dawe -- 3/10/2011, 7:46 am